Contour

Carved-aluminium armoured offset pivot entrance door

Flowing contour lines carved across a warm wood-tone face, with a long black pull that carries the smart lock.

Specifications
Opening	Offset pivot
Largest size (W × H)	4,000 × 8,000 mm
Aluminium face	30 mm carved aluminium
Aluminium alloy	5000-series aluminium alloy
Lock	Wintech fingerprint smart lock
Pivot or hinges	FritsJurgens pivot hinge
Finish	Brushed metallic paint or wood-grain transfer
Lead time	35–45 days after drawing approval and deposit
Minimum order	1 door
EXW price	From USD 1,500 per m²

Prices are EXW at our factory in Wuyi, in US dollars. Freight, duties, local delivery and installation are not included.

Ask about Contour

Questions about Contour

How large can the Contour door be?

Up to 4,000 × 8,000 mm (W × H). Every Contour door is made to your opening and drawing, from one door.

What is the Contour door made of?

The face is 30 mm carved aluminium (5000-series aluminium alloy), finished in brushed metallic paint or wood-grain transfer. Behind the face is our armoured construction: a galvanised steel sheet, an aluminium profile frame with an aluminium honeycomb core, a second galvanised steel sheet and the inner panel.

Which lock and hinges does the Contour door use?

The door shown has a Wintech fingerprint smart lock and a FritsJurgens pivot hinge. Smart locks from KFV, G-U or Wintech can be fitted instead.

How much does the Contour door cost?

From USD 1,500 per m², EXW at our factory in Wuyi, China. Freight, duties, local delivery and installation are not included. Production takes 35–45 days after drawing approval and deposit.

Read before you order

How big and how heavy can a pivot door be?What limits a large pivot entrance door. The hinge's weight class, a flat leaf, the floor and head fixings, wind and shipping, with FritsJurgens' figures and our maximum sizes.
Preparing the floor for a pivot door: floor plates, levels, thresholds and underfloor heatingWhat a pivot entrance door needs from the floor and the head, when to fix the floor level, how the bottom gap and threshold are planned, and whether underfloor heating is a problem.
Cast or CNC-carved aluminium door faces: how they are made and how they differHow a cast aluminium door face and a CNC-carved one are made, what each is good at, where flat and bent aluminium sheet fits in, and what to ask before you choose.
Door U-value explained: what the number means and how to read a test reportWhat a door U-value (Ud) means, how it is calculated or hot-box tested, the limits in Approved Document L, Passive House and ENERGY STAR, and how to read a test report.

All guides →